LED embedded membrane switch
1.Printing information, colors and shapes can be varied flexible
2.Competitive price with high quality
·Operating Voltage: 0-35 V DC.
·Operating Current: 100 MA Max.
·Operating Contact Resistance: Less than 100 OHMS typical
·Contact Bounce: Less than 5 Milliseconds typical.
·Conductors: Printed silver conductive inks or carbon blend.
·Life Expectancy: 1,000,000 actuations per switch position
·Actuation Force:170-700g, Range depending on customer specification.
·Switch Travel: .0.1mm-0.4mm typical.
·Overall Thickness: .0.6mm-1.52mm typical.
·Storage Temperature: -40°C to +65°C
·Operating Temperature and Altitude: -40°C to +65°C
·Humidity: No delamination after 24 hours at 80°C and 90%RH.
Overlay Materials: The most commonly used base materials are polyester and polycarbonate.
Rear Adhesive: 3M 467MP, 3M 468MP, etc.
Standard Tolerances: +/-.010 inch.
Matching color: Pantone and RAL color matching system.
Tail, pin and circuit layout: subject to customers detailed requests.
Notice: We have the capacity to provide you membrane switches with other special requirements, such as Shielding, Windows/Lens Coating, Embossing, Embedded LED, UV glossy/matte/textured, etc.
LED Membrane Switch